Title Details

Preface.

Professor Hubert I. Aaronson Honorary Plaque.

Diffusional Transformations.

Nucleation.

Nucleation on Irrational Interphase Boundaries in Diffusional Phase Transformations of Steels (T. Furuhara, G. Miyamoto, H. Saito, and T. Maki).

Influence of Crystallography and Solute Partitioning on Ferrite Growth in Steels (R.E. Hackenberg, and G.J. Shiflet).

The Assisted Nucleation of θ' in Al-Cu Alloys (B.M. Gable, L. Bourgeois, J.-F. Nie, and B.C. Muddle).

Nucleation of Intermediate Phases in Aluminium-Silver-Copper Alloys (J.M. Rosalie, L. Bourgeois, and B.C. Muddle).

Discussion on the Nucleation Rate of Ferrite During Continuous Cooling in a Low Carbon Steel Measured By 3DXRD (Z.-G. Yang, and M. Enomoto).

The Graphitisation Process in Medium-Carbon Steel (D.V. Edmonds, and K. He).

Effect of Cooling Rate on the Evolution and Distribution of γ Variants and α2 Phase in γ-TiAl Alloy (M. Sundararaman, J.B. Singh, G. Sharma, and S. Banerjee).

Growth and Interphase Boundary Structure.

Calculation of Interfacial Energy Between α and γ Iron Near a Rational Orientation Relationship (M. Enomoto, T. Nagano, and J.B. Yang).

Application of Atom-Row Matching Concepts to Grain Boundaries (J.M. Howe, and A.R.S. Gautam).

A Method for the Correlation of the Cahn-Hilliard Gradient Energy Coefficient with Bulk Thermodynamic Data (E.A. Lass, P. Zhou, W.C. Johnson, and G.J. Shiflet).

In-Situ HRTEM Study of a Diffuse Interface in Au-Cu Alloy (A.R.S. Gautam, N. Raffler, J.M. Howe, and K. Chatterjee).

Experimental and Theoretical Approach of the Austenite to Ferrite Interphase Boundary Composition in a Fe-C-Mn Model Alloy (O. Thuillier, F. Danoix, M. Gouné, and D. Blavette).

Determination of the Critical Carbon Content for Growth of Acicular Ferrite (A. Borgenstam, and J.M. Ericsson).

A Study of the Austenite to Ferrite Transformation in Fe-C-X Alloys Using Decarburization Experiments (H.S. Zurob, C.R. Hutchinson, Y. Bréchet, and G.R. Purdy).

Substitutional and Interstitial Elements Partitioning During the Isothermal Decomposition of Austenite in a Cr-Base Alloy Steel (C.E. Pinedo, and H. Goldenstein).

Study on the Crystallography of Austenite Precipitates in a Duplex Stainless Steel (D. Qiu, and W. Zhang).

Influence of Crystallographic Variant Selection on Microstructure Evolution in Titanium Alloys (S. Kar, R. Banerjee, E. Lee, and H.L. Fraser).

Coherent-to-Incoherent Transition of Intergranular BCC-Precipitates by Pre-/Post-Deformations in a Ni-43Cr Alloy (Y. Adachi, and K. Tsuzaki).

Understanding of Epitaxial Alignment in NiSi Thin Films on a (001)Si Surface Using Edge-to-Edge Matching Model (M.-X. Zhang, P.M. Kelly, and C. Detavernier).

Crystallography of Ferrite-Austenite Phase Transformation Induced by Nitrogen Absorption in Fe-25Cr Alloy (Y. Futamura, T. Ando, T. Tsuchiyama, and S. Takaki).

Crystallographic Relationships Between Taenite and Kamacite in the Gibeon Meteorite (Y. He, S. Godet, P.J. Jacques, and J.J. Jonas).

Spinodal Decomposition and Ordering.

Studies of Phase Separation in Alloys Using the Stochastic Statistical Approach (V.Yu. Dobretsov, I.R. Pankratov, A.Yu. Stroev, and V.G. Vaks).

Atom Jumps in Intermetallics: From Bulk to Thin Films (W. Pfeiler, W. Püschl, Ch. Issro, R. Kozubski, and V. Pierron-Bohnes).

Thermal and Mechanical Disordering of Ordered Alloys (D.G. Morris, and M.A. Muñoz-Morris).

Spinodal Decomposition and Ordering Transformation in U-6 wt% Nb (L.L. Hsiung).

Generalized Ginzburg-Landau Theory of Antiphase and Interphase Boundaries for the B2-Type and L10-Type Alloy Order (K.Yu. Khromov, I.R. Pankratov, and V.G. Vaks).

Microstructure and Defect Structure Evolution During Annealing of Equiatomic L10-Ordering FePd Intermetallic (A.R. Deshpande, and J.M.K. Wiezorek).

Ordering Process and Formation of Anti-Phase Boundary in Long-Period Superstructures of Al-Rich TiAl Single Crystals (T. Nakano, Y. Nagasawa, Y. Umakoshi, S. Hata, N. Kuwano, M. Itakura, and Y. Tomokiyo).

Phase Transformations of A1→D022 in Ni-V Binary Alloys (A. Suzuki, and M. Takeyama).

TEM Study on the Order-Disorder Transition of Cr2N Precipitates in High-Nitrogen Austenitic Steel (T.-H. Lee, C.-S. Oh, C.G. Lee, S.-J. Kim, and S. Takaki).

Precipitation.

3-D Atomic-Scale Experimental and Modelling Studies of the Early Stages of Precipitation (A. Cerezo, S. Hirosawa, G. Sha, and G.D.W. Smith).

Non-Isothermal Precipitation Kinetics in Metallic Alloys (A. Deschamps, M. Nicolas, F. Perrard, and F. Bley).

From Titanium to Titanium Hydrides: Transformation Paths, Orientation Relationships and Interface Planes (E. Conforto, and D. Caillard).

3D Atom Probe Investigation of the Early Stages of Precipitation in an Al-Mg-Si Alloy (F. De Geuser, W. Lefebvre, and D. Blavette).

Atom Probe Tomography Study of GPB Zones in Al-Mg-Cu-(Si) Alloys (L. Kovarik, M.K. Miller, S.A. Court, and M.J. Mills).

Nanostructural Temporal Evolution and Solute Partitioning in Model Ni-Based Superalloys Containing Ruthenium, Rhenium, and Tungsten (D. Isheim, G. Hsieh, R.D. Noebe, and D.N. Seidman).

Designing Non-Isothermal Heat Treatments for Precipitation Hardening Systems: An Example of Strength Optimization in a Model Fe-Cu Alloy (M. Gouné, A. Redjaïmia, and C.R. Hutchinson).

Deformation of High Solute Aluminum Alloys and the Inhibition of GP Zone Formation (C.J. Hovanec, and R.D. Doherty).

Cluster Dynamics Modeling of Precipitation Kinetics: Recent Developments (L. Laé, and P. Guyot).

Nucleation and Growth of Second Phase Precipitates Under Quenching (L.O. Jernkvist, and A.R. Massih).

Nitride Precipitation and Ferrite to Austenite Phase Transformation Induced by Nitrogen Absorption in Fe-25%Cr-Ti Alloy (T. Tsuchiyama, T. Fukumaru, and S. Takaki).

Atom Probe Tomography and Transmission Electron Microscopy Investigation of Chromium Nitrides in FeCr Alloys (R. Danoix, L. Legras, B. Hannoyer, J. Dulcy, and F. Danoix).

Precipitation Behavior of (Mo) Phase on Dislocations in Mo5SiB2 Phase (N. Sekido, R. Sakidja, and J.H. Perepezko).

Effect of Si Addition on the Precipitation of Iron Carbide in Tempered High Carbon Martensite (G. Miyamoto, T. Furuhara, T. Maki, J.C. Oh, and K. Hono).

Chemical Analysis of the Cube Phase in Al-Mg-Si Alloy by EFTEM (K. Matsuda, Y. Ishida, I. Mullerova, L. Frank, and S. Ikeno).

Interfacial Control of β-Phase Precipitation in Al-Mg Alloys (Y. Yuan, A.J. Davenport, and M. Strangwood).

Influence of Cold Work and Solutionising Temperature on Age Hardening Capability of Al-Mg-Mn Alloys with Small Cu and Si Additions (Z. Zhu, and M.J. Starink).

Decomposition of High-Temperature α-Ti Phase Along the Pathway of α→β+γ in γ-TiAl Alloys (S. Kobayashi, and M. Takeyama).

Nucleation and Growth of β Phase Precipitated Along the Pathway ofα→β+γ in γ-TiAl Alloys (M. Takeyama, H. Fukushima, S. Kobayashi, and T. Matsuo).

Precipitation of Cubic γ' and Tetragonal γ" Ordered Phases in Disordered Ni-V-Al Alloys and the Morphology of Microstructures (T. Kozakai, K. Makino, T. Moritani, and M. Doi).

Effect of the Precipitate Morphology on the Phase Separation Behaviour ofγ’ Precipitate in a Ni-Al-Ti Alloy (T. Moritani, Y. Nishikawa, T. Kozakai, and M. Doi).

Modelling and Characterization of Precipitate Formation and Transformations in Fe-Ni-Cr Reformer Tube Alloys (J. Laigo, F. Tancret, R. Le Gall, and J. Furtado).

Precipitate Morphology Investigated by the FEM Analysis Based on the 3D-NCS Model in BCC/HCP System (N. Miyano, K. Ameyama, N. Hirano, and Y. Takao).

Phase Transformations Caused by Corrosion of Ternary and Quaternary γ-TiAl-Based Alloys in SO2 Atmosphere (A. Gil, Z. Żurek, A. Stawiarski, J. Żurek, B. Sulikowski, W.J. Quadakkers, and A. Kuc).

Carbide Precipitation in an Fe3Al-Cr-Mo-C Alloy (S. Kobayashi, S. Zaefferer, and A. Schneider).

Precipitation and Its Effect on the Creep Properties of Certain Cast H-Series Austenitic Steels (G. Muralidharan, N.D. Evans, K.C. Liu, J.G. Hemrick, M.L. Santella, P.J. Maziasz, V.K. Sikka, and R.I. Pankiw).

Effect of Cu Addition on Microstructure and Mechanical Properties in 9%Ni Steels (N. Nakada, J. Syarif, T. Tsuchiyama, and S. Takaki).

Mechanism for Beneficial Effect of Boron Addition on Creep Resistance of 9-12% Chromium Steels (A. Golpayegani, and H.-O. Andrén).

Banite and Diffusional-Displacive Transformations.

Hard Bainite (H.K.D.H. Bhadeshia).

Bainite Formation Under Stress (T.Y. Hsu, and Z. Xu).

Diffusional-Displacive Phase Transformations and Related Issues (H.I. Aaronson).

Low Temperature Bainite: An Analysis at Atomic Level (F.G. Caballero, M.K. Miller, S.S. Babu, C. Garcia-Mateo, and C. Garcia de Andrés).

Kinetics and Microstructural Evolution During Isothermal Bainitic Transformation (N. Luzginova, L. Zhao, and J. Sietsma).

Hybrid Displacive-Diffusional Transformation in Manganese-Aluminum Base Alloys (J.M.K. Wiezorek, C. Yanar, E.A. Stach, V. Radmilovic, and W.A. Soffa).

Low Temperature Phase Instability of the Gamma Phase in InSn Alloys: An Application of the Third Law of Thermodynamics (S. Chu, C. Yanar, A. Schwartz, T.B. Massalski, and D.E. Laughlin).

Carbon Enrichment of Austenite and Carbide Precipitation During the Quenching and Partitioning (Q&P) Process (F.C. Rizzo, D.V. Edmonds, K. He, J.G. Speer, D.K. Matlock, and A. Clarke).

Orientation Relationships and Variant Selection During the γ-to-αb Transformation in a Hot-Rolled TRIP Steel (S. Godet, Y. He, P.J. Jacques, and J.J. Jonas).

Recrystallization and Grain Boundaries.

Nucleation Processes in Recrystallization: History and Current Status (R.D. Doherty).

Recrystallization and Transformation Textures (G. Gottstein, M. Crumbach, and I. Lischewski).

Bulk Investigations of Grain Boundary Migration During Recrystallization Utilizing the 3DXRD Microscope (S. Schmidt, R.B. Godiksen, and D. Juul Jensen).

Alternative Mechanism of Secondary Recrystallization: Solid-State Wetting Along Grain Boundaries or Triple Junctions (N.M. Hwang, D.K. Lee, K.J. Ko, B.J. Lee, J.T. Park, B.D. Hong, J.K. Kim, and D.Y. Kim).

Influence of Finishing Rolling Temperature on Recrystallization of Electrical Steels (J.P. Ferrer, C. Capdevila, and C. García de Andrés).

Computation of Grain Boundary Stiffness and Mobility from Boundary Fluctuations (S.M. Foiles, and J.J. Hoyt).

Statistical Mechanics Prediction of Solid—Solid Transformations Induced by Plastic Deformation (P.E.J. Rivera díaz del Castillo, M. Huang, and S. van der Zwaag).

Bimodal Grain Structure Development During Reheating of Rolled High Strength Low Alloy Steels (D. Chakrabarti, C. Davis, and M. Strangwood).

Recrystallization in High Purity Polycrystalline Magnesium During Cold Rolling (A. Yamamoto, M. Jotoku, and H. Tsubakino).

Discontinuous and Cellular Reactions.

Fundamentals of Interface Migration During Solid-State Discontinuous Reactions (P. Zięba).

On the Structural Stability of Grain Boundary Diffusion-Controlled Precipitation Products (G. Solórzano, J.A. Conh, and R.M. Andrade).

Non Classical Eutectoid Decomposition Products Morphologies in Fe-Cr-C and Fe-Cr-Mo-C Steels (H. Goldenstein, J.A.B. Cifuentes, and A. Sinatora).

On the Product Phases of the Cellular Transformation in Cu-Ti Age Hardening Alloys (N. Boonyachut, Y. Peng, W.A. Soffa, and D.E. Laughlin).

Grain Boundary Discontinuous Precipitation of γ Phase in Cu−0.75wt%Be Bicrystals (R. Monzen, and C. Watanabe).

A Survey of Eutectoid Decomposition in Three Lanthanide-Magnesium Systems (J.P. Hadorn, and G.J. Shiflet).

Modeling of the Microstructural Evolution During Intercritical Annealing of Steels with a Ferrite and Pearlite Initial Microstructure (F.G. Caballero, D. San Martín, C. Capdevila, A. García-Junceda, and C. García de Andrés).

Discotinuous Precipitation in a Cu−4mass%Ni−0.95mss%Si Alloy (C. Watanabe, R. Monzen, and K. Higashimine).

Discontinuous Precipitation in Cu−5.7wt%Ag Single Crystals (R. Monzen, and C. Watanabe).

Massive Transformation.

Kinetics of the Massive Transformation in Iron-Based Alloys (E.J. Mittemeijer, F. Sommer, and Y.C. Liu).

Atomistic Simulations of Interface-Controlled Phase Transformations (C. Bos, F. Sommer, and E.J. Mittemeijer).

Effect of Fe Addition on the Continuous Cooling β-to-α Transformation Behaviors of Commercially-Pure Ti (S.H. Chon, and J.K. Park).

The Behaviour of δ Ferrite During Quenching in an Industrial Ferritic Stainless Steel Containing 11% Cr (B. Chéhab, Y. Bréchet, M. Véron, J.-C. Glez, and J.-D. Mithieux).

Coarsening.

High Resolution Electron Microscopy in the Investigation of Splitting Particles in Ni Alloys (H.A. Calderon, L. Calzado-Lopez, C. Kisielowski, G. Kostorz, and T. Mori).

Coarsening of Nanoscale Coherent Precipitates in Ni-Al-Si Alloys (G. Muralidharan, S. Weber, M. Pollard, and H. Chen).

Coarsening Kinetics in Al-Sc-Zr Alloys (A. Tolley, V. Radmilovic, and U. Dahmen).

Coarsening Process of Decomposed Phases in Cu-Ni-Cr Alloys (F. Hernandez-Santiago, V.M. Lopez-Hirata, M.L. Saucedo Muñoz, and H.J. Dorantes-Rosales).

Chemical Mixing and Growth Behavior of Ag and Au Nanocrystal Mixtures (T.M. Murray, and J.M. Howe).

Coarsening of Al3Sc Particles in an Al−Mg−Sc Alloy (C. Watanabe, D. Watanabe, R. Monzen, and K. Tasaki).

Phase Transformations During Service Aging of Nickel Based Superalloy Pyromet 31V (N.D. Evans, P.J. Maziasz, and J.J. Truhan).

Driven Transformations.

Atomistic Monte Carlo Simulations of Radiation Induced Segregation and Precipitation (F. Soisson).

Transformation of Pharmaceutical Compounds by Mechanical Activation (M. Descamps, J.F. Willart, and S. Desprez).

On Cyclical Phase Transformations in Driven Alloy Systems: A Thermodynamic Approach (J.K. Lee, and W.C. Johnson).

Nanoscale Patterning of L12 Chemical Order in Ni3Al Alloy Processed by Energetic Ions (J. Ye, Y. Li, R.S. Averback, P. Bellon, and J.-M. Zuo).

The Effect of Plastic Deformation on the Austenite-to-Ferrite Phase Transformation in Low-Alloy Steel (Y. van Leeuwen, and J. Sietsma).

Influence of External Fields on Some Alloys Exhibiting FCC-L10 Phase Transformation (K. Tanaka, and T. Ichitsubo).

Effects of a High Magnetic Field on Diffusional Transformation Temperature and Structure in Fe-Based Alloys (X. Hao, and H. Ohtsuka).

Investigation of Austenite Decomposition in High-Carbon High-Strength Fe-C-Si-Mn Steel Under 30 Tesla Magnetic Field (R.A. Jaramillo, S.S. Babu, M.K. Miller, G.M. Ludtka, G. Mackiewicz-Ludtka, R.A. Kisner, J.B. Wilgen, and H.K.D.H. Bhadeshia).

Austenite-to-Ferrite Transformation of Plain Low Carbon Steel During Deformation within a (γ + α) Two-Phase Field (J.K. Park, S.Y. Ok, and K.H. Kim).

Microstructural Evolution in Cu-Spinodal Alloy Driven by High-Energy Ball Milling and Dry Sliding Wear (J. Weninger, J.A. Bares, T. Tyler, J. Ye, and P. Bellon).

Investigation of Phase Transformation Kinetics and Microstructural Evolution in 1045 and 52100 Steel Under Large Magnetic Fields (R.A. Jaramillo, G.M. Ludtka, R.A. Kisner, D.M. Nicholson, J.B. Wilgen, G. Mackiewicz-Ludtka, N. Bembridge, and P.N. Kalu).

Effect of Applied Stress on the Ferrite Transformation Behavior of a Low Carbon Steel (J.-H. Kang, S. Torizuka, K. Nagai, and H.-C. Lee).

Phase Transformations in High Strength Austenitic FeMnCr Steel (L. Bracke, B.C. De Cooman, M. Liebeherr, and N. Akdut).

Author Index.

Subject Index.