Title Details

Headquartered in the United States but international in both its membership and activities, The Minerals, Metals & Materials Society (TMS) is a rare professional organization that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.

Session I.

CuInSe2/Si Heterojunctions for Photovoltaic Applications (O. Akpa, S. Shoieb, and K. Das).

High-Temperature Thermoelectric Behaviors of Highly Dense Polycrystalline Nonstoichiometry Tiox Ceramics (Y. Liu, J. Lan, B. Zhang, and H. Zhu).

An Experimental Setup and Procedure for Thermal Resistance Measurements of a Thermal Interface Material (K. Kalkundri, F. Andros, and B. Sammakia).

Materials and Manufacturing Challenges in Hybrid Flexible Electronics (K. Cooper).

Session II.

Improved Performance of a Fluorescent Blue Organic Light Emitting Diode with Hole Blocking Materials as Dopants for Transport Layers (G. Samal, K. Unni, S. Bharat, and Deepak).

Luminescence of the GaP:N Long-term Ordered Single Crystals (S. Pyshkin, J. Ballato, A. Mura, and M. Marceddu).

Opals, Photonic Band Gap Materials, Pleochroic Refraction, and Monochromatic Lasers (M. Stem).

Magnetism of a V Monolayer on Nb(001): A First Principles Calculation (A. Ramanathan, and J. Khalifeh).

General Abstracts: Light Metals Division.

Session I.

Alcoa Alumina Refinery Secures Future through Reliability Excellence Efforts (J. Kalpoe, and K. Johnson).

Aluminium Industry Perspective and Price Outlook (G. Djukanovic).

Application of ECAP on Commercial Purity Aluminum (N. Evcimen, Y. Bayrak, and A. Ekerim).

Assessment of Casting filling by Modelling Surface Entrainment Events using CFD (M. Jolly, C. Reilly, and N. Green).

Effective Capital Management - A Case Study (J. Petrolito, and M. Richard).

Electrochemical Characterization of the Al-Mg Foamed Materials in NaCl Solutions (S. Valdez, S. Casolco, and H. Castañeda).

Session II.

Enhanced Resistance of Ti-alloys against Environmental Attack by a Combined Al- and F-treatment (A. Donchev, M. Schütze, R. Yankov, and A. Kolitsch).

Fabrication of Aluminum Foam with New Stabilizer Composited by Fly Ashes and Short Copper-Coated Carbon Fibers (P. Chen, H. Luo, L. Wang, and Y. Mu).

Material Selection for the Lining of Aluminum Holding & Melting Furnaces (A. Wynn, J. Coppack, and T. Steele).

Mechanical Properties and Precipitation Behaviors of Mg-Al-Sn and Mg-Zn-Sn Alloys (T. Konno, J. Lee, T. Ohya, H. Son, and H. Jeong).

Multi Sensor Data Fusion for Aluminium Cell Health Monitoring and Control (H. Viumdal, R. Yan, M. Liane, B. Moxnex, and S. Mylvaganam).

Session III.

Multistage Fatigue Modeling for Three Wrought Al Alloys (Y. Xue).

Optimised Fatigue Behaviour of Ti-6Al-4V Alloy Components Fabricated by MIM (O. Ferri, T. Ebel, and R. Bormann).

Production of Aluminum and Its Alloy at Lower Temperature through Direct Electroreduction of Solid Alumina and Mixed Oxides in Chloride Melt (H. Yin, L. Gao, H. Zhu, F. Gan, and D. Wang).

Thermo-Mechanical Characterization of Al-Cu-Mg Composites Reinforced with Diboride Particles (N. Cortes, P. Barrado, S. Hoyos, H. Calderón, and O. Suárez).

Session II.

Study on the Materials of Rolled Al-Mg-Si Alloy Used for the High-speed Trains (K. Ji, G. Yao, Y. Mu, and G. Zu).

Session III.

Thermodynamic Design of Ultra-Strong Titanium Alloys Undergoing Plasticity Induced Martensitic Transformations (S. Neelakantan, P. Rivera-Diaz-del-Castillo, and S. Zwaag).

Upgrade and Electrochemical Reduction of TiO2-Rich Slag to Titanium (Q. Xu, L. Sun, Q. Song, W. Xing, J. Du, and Z. Xi).

Wear Behaviour of the Newly Developed Biomedical Beta Titanium Alloy (Ti-23Nb-0.7Ta-2Zr-1O) (S. Sathish, M. Venkatesh, M. Geetha, R. Asokamani, and T. Nandy).

General Abstracts: Materials Processing and Manufacturing Division.

Welding.

Correlation between Shoulder Flow Zone Quality and Material Flow Quantity during Friction Stir Welding of Thick Aluminum Section Using Scroll Shoulder Tool (D. Yan, Z. Chen, and G. Littlefair).

Forming and Machining.

Effect of AWJ Machining Processes on Flexural Properties of CFRP Composites (T. Briggs, and M. Ramulu).

New High Strength Ductile Bainitic Forging Steels (C. Keul, M. Urban, M. Fischer, G. Hirt, and W. Bleck).

Superplastic Blow Forming of Steel and Titanium Alloys for Aerospace Parts (H. Lee, J. Yoon, and Y. Lee).

Cooling Behavior of Lead-Free Bismuth Bronze Produced through the Frozen Mold Casting Process (S. Tada, H. Nakayama, T. Nishio, and K. Kobayashi).

Microstructure, Characterization, and Modeling.

Mathematical Modelling of an Annealing Furnace for Process Control Applications (N. Depree, J. Sneyd, S. Taylor, M. Taylor, M. O'Connor, and J. Chen).

Synthesis and Processing.

Innovative and Integrated Technologies for the Development of Aeronautic Components (N. Gramegna, F. Bonollo, E. DellaCorte, F. Grosselle, and M. Cocco).

Thermo-Mechanical Behavior of Chemically Bonded Phosphate Ceramic Composites Reinforced with Graphene Nanoplatelets: A Substantial Material Improvement toward Structural Applications (H. Colorado, C. Hiel, and H. Hahn).

Synthesis and Microstructure of Tic/Tin Porous Ceramic Composites Processed via Hysycvd/Direct Nitridation (J. Flores-Garcia, and M. Pech-Canul).

Cyclic Oxidation Behavior of Detonation Gun Sprayed Ni-20Cr Coating on a Boiler Steel at 900°C (G. Kaushal, H. Saheet, and S. Prakash).

General Abstracts: Structural Materials Division.

Fatigue and Fracture.

Fatigue Crack Growth Mechanisms of Long and Small Cracks in Structural Materials (A. Gavras, C. Lammi, and D. Lados).

Effect of Hydrogen on Crack Nucleation in 316 Stainless Steel under Rotating Beam Fatigue Loading Conditions (D. Matson, C. Skipper, G. Leisk, and A. Saigal).

Effect of Ca, Mg and Ti-Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon Steel (J. Ma, D. Zhan, Z. Jiang, J. Yu, J. He, and H. Shen).

Non-Ferrous Materials.

Stress-Rupture Behavior of the Single Crystal Superalloy M09A (Q. Zheng, J. Yang, H. Zhang, X. Sun, H. Guan, and Z. Hu).

Materials Characterization and Shock Loading.

Research on the Thermal Plasticity of the 18Mn-18Cr-0.77N-2Mo High Nitrogen Austenitic Stainless Steel (L. Wanming, L. Huabing, and J. Zhouhua).

An Overview of the Microstructures of High-Strength Two-Phase Near-Equi-atomic FeNiMnAl Alloys (I. Baker, Y. Liao, X. Wu, H. Wu, M. Miller, K. Russell, and P. Munroe).

Was There a Bomb on Mattei's Aircraft? (D. Firrao, and G. Ubertalli).

Improvement of Charpy Impact Properties in Heat Affected Zones of API X80 Linepipe Steels Containing Complex Oxides (H. Sung, S. Shin, W. Cha, K. Oh, and S. Lee).

Microstructural Analysis of Separations Occurring during

Charpy Impact Test of Linepipe Steels (S. Hong, S. Shin, J. Bae, K. Kim, S. Lee, and N. Kim).

Environmental Degradation.

Investigation of the Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol Environments (L. Goodman, X. Lou, and P. Singh).

Factors Affecting the Environmental Assisted Cracking Behavior of 2205 Duplex Stainless Steel (K. Chasse, D. Yang, P. Singh, and R. Neu).

Hydrogen Embrittlement of a Bainitic Wheel Steel (R. Xuechong, L. Fenbin, S. Yanjing, and C. Wuyang).

General Poster Session.

Session I.

Annealing Behavior of TiO2-sheathed Ga2O3 Nanowires (C. Lee, H. Kim, C. Jin, J. Jun, C. Hong, and J. Kang).

Deformation of High Purity Copper Specimens in Compression between Flat and Grooved Dies (B. Raddad, T. Al-hashani, and M. Abdel-Rahman).

Structure and Thermal Oxidation Properties of RuAl And Ru-Al-Ti Alloys Prepared by Mechanical Alloying (M. Clisson, J. Gaudet, L. Roué, and D. Guay).

Study on Magnetic-Gravity Combination Separation and Acid Leaching of a High Phosphorus Fine Hematite (T. Jiang, L. Yang, and Y. Guo).

Silver Recovery from Waste Radiographic Films Using Different Methods (H. Morcali, S. Aktas, and O. Yucel).

Dissolution of Platinum from Scrap Automotive Catalytic Converters Using a Combination of HCl+H2O2 (C. Uysal, S. Aktas, E. Kizilaslan, and K. Sesen).

Study on Visible Light Photocatalytic Performance of Nano Tungsten Trioxide (W. Daoxin).

Plasma-Polymerization of Hexamethylcyclotrisiloxane Using Atmospheric Pressure Dielectric Barrier Discharge (G. Kim, and Y. Kim).

The Effects of Nickel in Oxide Layers on the AZ91 Mg Alloys Synthesized by Plasma Electrolytic Oxidation (D. Shin, K. Shin, I. Hwang, D. Lee, and B. Yoo).

Development of Ultrasonic Techniques for Process Control in Iron and Steel Making (J. Pandey, M. Raj, K. Balasubramaniam, and N. Bandyopadhyay).

Enhancing Mineral Beneficiation by High Intensity Power Ultrasound (J. Pandey, M. Raj, M. Sinha, and N. Bandyopadhyay).

Rotary Ultrasonic Drilling of Al2O3 Ceramic Material (B. Rao, P. Laxminarayana, and M. Ramulu).

EDM and AWJ Edge Finishing on Surface Morphology of Hybrid Composite Laminates (P. Laxminarayana, V. Isvilanonda, M. Ramulu, and B. Rao).

Microstructures and Mechanical Properties of AM60B-based Eco-Mg Alloys (M. Choi, D. Jang, and S. Kim).

Oxidation and Ignition Resistances of AM60B-based Eco-Mg Alloys (I. Kim, J. Seo, and S. Kim).

Effect of Fabrication Parameters on Morphology of Porous Kaolin Ceramics (M. Keshavarz, and A. Barzegar).

Preparation and Characterization of Nanocrystalline Silver Particles (B. Ebin, E. Yazici, S. Gürmen, and B. Özkal).

Aerosol Route Synthesis of Copper Oxide Nanoparticles Using Copper Nitrate Solution (B. Ebin, O. Gencer, and S. Gürmen).

Facile Synthesis of Hollow Co3O4 Microspheres by Solution Spray-Oxidation Method and Its Properities as Supercapacitors (G. Qiusong, D. Guangrong, and G. Xueyi).

Impact toughness Enhancement of an Electron Beam Welded Ti-6Al-4V Titanium Alloy through Post-Welding Heat Treatment (C. Buirette, and J. Huez).

Interfacial Reactions of Pure Sn, Sn-3.0Ag-0.5Cu and Sn-9.0Zn Lead-free Solders with the Fe-42Ni Substrate (Y. Hsieh, Y. Yen, and C. Jao).

Quality of Slab Ingots and Heavy Plates Produced by a 40t ESR Furnace (X. Geng, and Z. Jiang).

Production of Titanium Carbide Reinforced Titanium Matrix Composites via Powder Metallurgy Method (B. Karaduman, O. Meydanoglu, H. Cimenoglu, and E. Kayali).

Properties and Performance of Composites Based on Superrefractories Cements (I. Nickolai, and T. Valentina).

Surface Treatment of Materials by Low Energy High Current Pulsed Electron Beam under Evaporating Mode (K. Zhang).

Deformation Field and Microstructure of Copper in Flat Punch Indentation (M. Hudspeth, T. Murthy, C. Saldana, and S. Chandrasekar).

Laser Beam Welding of Haynes 188 (A. Odabasi, N. Unlu, G. Goller, and N. Eruslu).

Microstructure Components and Mechanical Properties of an Acicular Ferrite Pipeline Steel (W. Wang, Y. Shan, W. Yan, and K. Yang).

Grain Boundary Character Distribution and Mechanical Property of an as Cold Rolled High Nitrogen Austenitic Stainless Steel (W. Yan, Y. Shan, K. Yang, and W. Wang).

Comparison of Stress Corrosion Cracking and Hydrogen Embrittlement Resistance of High Strength Aerospace Alloys (D. Wert, and T. Werley).

Corrosion Behavior of Al-Si-Cr-Ni-Cu Bearing Low Carbon Steel in A Cyclic Dry/Wet Laboratory Test (D. Zhan, H. Zhang, S. Bai, and Z. Jiang).

Microstructure Changes in Primary Recrystallization of Grain-Oriented Silicon Steel by Pulse Current Intermediate Annealing (L. Liu, Q. Xia, W. Shi, L. Li, X. Wu, Q. Zhai, and W. Zeng).

Effect of Particle Size on the Microstructure of Rapidly Solidified Hypereutectic Iron Alloy Powder (M. Yang, Y. Dai, C. Song, and Q. Zhai).

Effect of Nitrogen Addition on Isothermal Phase Transformation and Mechanical Properties in Biomedical Co-Cr-Mo Alloys (S. Kurosu, H. Matsumoto, and A. Chiba).

Different Tempering Precipitation Behaviors of Carbide in 2.25Cr-1Mo-0.25V Steel After Quenching and Normalizing (Z. Yongtao, Z. Sixin, W. Xiaojun, Z. Hanqian, and L. Jinfu).

Microstructure Development of Silicon Steel Prepared by Near-Rapid Solidification (X. He, Q. Sun, L. Wang, Q. Peng, and Q. Zhai).

Small Punch Creep of Service-Exposed SUS 316 HTB Superheater Tubes of Fossil Boilers (M. Saucedo-Muñoz, S. Komazaki, T. Hashida, T. Takahashi, V. Lopez-Hirata, and T. Shoji).

Phase Decomposition during Aging in an Al-22wt.%Zn Alloy (L. Melo-Maximo, D. Melo-Maximo, S. Lezama-Alvarez, E. Avila-Davila, V. Lopez-Hirata, O. Soriano-Vargas, and J. Gonzalez-Velazquez).

Fatigue Life Prediction for Notched Structures using Mechanistic Multistage Fatigue Model (Y. Xue, B. Jordon, and M. Horstemeyer).

Development of Alloys on an Iron Basis (Z. Zhumadilova).

Finite Element Analysis of Residual Stress of Plasma-Sprayed Coatings on Thick Wall Components Based on Nastran Software (L. Niu, T. Zhang, G. Shi, Z. Dou, J. He, and X. Cao).

Preparation of Iridium Fine Particle by the Effect of Grinding Additive, Nacl (Y. Kim, Y. Ham, and J. Lee).

Evaluation of High Energy Milling Behavior of ZnO Powders in Different Milling Conditions (S. Yakar, A. Söyler, B. Özkal, S. Gürmen, and M. Öveçoglu).

Quality Control of the Refining Process at Electron Beam Melting and Development and Implementation of Engineering Support System for Process Modeling and Control (E. Koleva, G. Mladenov, I. Batchkova, K. Velev, V. Vassileva, and K. Vutova).

Sintering Densification and Microstructural Characterization of Mechanical Alloyed Fe-Mn-Si Based Powder Metal System (A. Söyler, B. Özkal, and L. Bujoreanu).

Effect of Non-Sinusoidal Oscillation Parameters on Liquid Friction and Lubrication Near the Meniscus of Slab Continuous Casting Mold (X. Meng, and M. Zhu).

Magnetic Properties of High-Coercivity Nanocrystalline Pr-Fe-Co-Al-B Bulk Amorphous (L. Bessais).

Water Modeling Study on the Behavior of Inclusions in a Gas-Stirred Ladle with Two Tuyeres (S. Zheng, X. Chen, J. Hu, and M. Zhu).

Effect of Niobium on Solidification Structure of Gray Cast Iron (Z. Wenbing, Z. Hongbo, Z. Dengke, H. Qin, and Z. QiJie).

Synthesis of Ag/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis Method (S. Gürmen, and B. Ebin).

Fatigue of Hybrid Polymeric Composites on Twisting (N. Chikhradze, L. Japaridze, G. Abashidze, and L. Okijava).

Influence of Parameters on Process Performance during Electro Dischrge Maching of Inconel-718 (S. Rajesha, A. Sharma, and P. Kumar).

Simulation of Dislocation Interaction with Precipitates (P. Jing, H. Lee, J. Shim, I. Robertson, and B. Wirth).

Electrochemical Formation of Mg–Li-Y Alloys at Solid Magnesium Electrode from Licl–Kcl –Ycl3 Melts (P. Wang, H. Lu, and F. Shi).

Electrochemistry of Tantalum Pentachloride in the Room Temperature Ionic Liquid 1-Butyl-3-Methy Imidazolium Hexafluorophosphate (P. Wang, H. Lu, and F. Shi).

Author Index.

Subject Index.