Title Details

Headquartered in the United States but international in both its membership and activities, The Minerals, Metals & Materials Society (TMS) is a rare professional organization that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.

Development and Application.

TRIMAL 52 - A New Aluminium Alloy for High Performance Spaceframe Construction (M. Rosefort, H. Gers, T. Koehler, J. Ehrke, D. Schnapp, and H. Koch).

Optimized Heat Treatment Sequence for AA 6061 (C. Zelger, J. Schnitzlbaumer, R. Prillhofer, J. Enser, and C. Melzer).

Microstructure, Mechanical Characterization and Hot Tensile Behaviour of Al-Zn-Mg Modified Alloys (P. Leo, E. Cerri, and H. McQueen).

Influence of the Grain Size On the Igc, Crack Propagation and Fracture Toughness Behaviour of Aa2024-T3 Sheet Material (J. Berneder, R. Rachlitz, C. Melzer, H. Antrekowitsch, and P. Uggowitzer).

Numerical Modeling.

Modeling Processing and Performance of an Al-Zn-Mg Alloy (J. Chinella).

Modeling the Solidification Under Pressure Casting Process for Aluminum Alloys (E. Druschitz, A. Druschitz, and R. Foley).

Processing and Texture.

Concurrent Precipitation in Continuous Cast Al Alloys (Q. Zeng, and T. Zhai).

Evaluation of Process Speed Effect in Aluminium Extrusion by Experiment and Simulations (B. Reggiani, L. Donati, and L. Tomesani).

Growth Morphology of Eutectic under

Unidirectional Solidification in Al-13%Si Alloys Containing Strontium and Magnesium (H. Liao, W. Huang, S. Wu, M. Cai, and Q. Wang).

Deformation Characteristics of a 6082-Al Alloy at High Temperatures (M. Soliman, E. El-Danaf, and A. Almajid).

Optimization of Baking Hardening of Al 5052 Sheet by a Response Surface Method (A. Nekahi, K. Dehghani, M. Mirzaie, and N. Zahmatkesh).

Materials Characterization.

Characterization of Hypereuteetic Al-19%Si Alloy Solidification Process using in-situ Neutron Diffraction and Thermal Analysis Techniques (W. Kasprzak, D. Sediako, M. Sahoo, and M. Walker).

Characterization of the Spacing Selection in AlCu Alloys (S. Gurevich, M. Amoorezaei, and N. Provatas).

Refinement of Hypereutectic Al-Si Alloy by Ca3P2 (Y. Zhang, and D. Yi).

Fatigue and Corrosion.

Effect of Heat Treatment on Corrosion Behavior of Aluminum-Lithium Alloy 8090 (A. Kobeisy, A. El-Aziz, R. Abdel-Karim, and A. Waheed).

Tensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics (S. Chen, T. Lui, and L. Chen).

Emerging Technologies.

Incubation Behavior of Hg-LME in Aluminum (S. Keller, and A. Gordon).

Adiabatic Shear Localization of Al-Sc Alloy at Extremely High Strain Rates (W. Lee, T. Chen, and G. Lu).

Effect of Electric Potential on the Evolution of Defect Substructure and Fracture Surface of Aluminum under Creep (S. Konovalov, O. Stolboushkina, Y. Ivanov, R. Filipiev, and V. Gromov).

Defects Producing Formation of Microcracks in Aluminum during Electrochemical Charging with Hydrogen (P. Rozenak).

Poster Session.

Optimization of Ingate Velocity via Gate Design (P. Dulyapraphant, and P. Kritboonyarit).

Preparation of Al-Ti-C Master Alloys from TiO2 (D. Cao, J. Wang, Z. Shi, Z. Wang, and Y. Liu).

Investigation of the Portevin-Le Chatelier Serrations at Type A to Type B Transition Regime in Al-2.5%Mg Alloy (A. Chatterjee, A. Sarkar, P. Barat, P. Mukherjee, and N. Gayathri).

Vacuum Thermal Extract Lithium with Coarse Ferrosilicon-Aluminum Alloy Produced by Electro Thermal Process (D. Yuezhong, D. Weiwei, and F. Naixiang).

Non-Corrosion-Flux-Assisted Wetting and Spreading of Al-Si-Cu-Based Brazing Alloy on 6063 Aluminum (Y. Bao, G. Zhang, and Y. Jiang).

Recent Advances in FSW Joining of Sheets on Structural Extruded Profiles (L. Donati).

Physical Modeling Study of A356 Semi-Solid Die-Casting Process (S. Vakili, and M. Ahmadabadi).

Effect of Alloying Elements on the Electrochemical Behavior of Al-Si-Mg alloys in Aqueous Solutions (MI. Pech-Canul, MA. Pech-Canul, M. Echeverría, E. Coral-Escobar, and M. Montoya-Davila).

Effect of Friction Stir Processing (FSP) on Particle Erosion Resistance of Casting A384 Aluminum Alloy (C. Yang, T. Lui, L. Chen, and Y. Chang).

Review of Solidification of Al-Si Alloy under Superhigh Pressure (G. Zhang).

A Mechanism-Based Constitutive Model for Alloy IC10 (H. Zhang, W. Wen, H. Cui, and Y. Xu).

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations

Symposium.

Innovations in Casting Technologies.

Experimental and Mathematical Modeling Progress on Scanning Laser Epitaxy: A Technique for Growing Single Crystal Superalloys (M. Kirka, R. Bansal, and S. Das).

Modeling of Grain Selection during Directional Solidification of Superalloy Single Crystal Turbine Blade Casting (D. Pan, Q. Xu, B. Liu, J. Li, H. Yuan, and H. Jin).

Prediction of As-Cast Grain Size Distribution from a Model of Equiaxed Solidification with Free Dendrite Transport (W. Mirihanage, and D. Browne).

Innovations in Additive Manufacturing.

Advanced Gas Atomization Processing for Ti and Ti Alloy Powder Manufacturing (I. Anderson, J. Sears, D. Byrd, J. Rieken, A. Heidloff, M. Glynn, and M. Ward).

Additive Manufacturing of Gamma Titanium Aluminide Parts by Electron Beam Melting (S. Sabbadini, O. Tassa, P. Gennaro, and U. Ackelid).

Properties of Ti-5Al-5Mo-5V-3Cr Samples Produced via Powder Hot-Isostatic-Pressing (N. Wain, X. Hao, R. Swamy, and X. Wu).

Fabrication and Characterization of Reticulated, Porous Mesh Arrays and Foams for Aerospace Applications by Additive Manufacturing Using Electron Beam Melting (S. Gaytan, L. Murr, F. Medina, E. Martinez, L. Martinez, and R. Wicker).

Innovations in Primary and Secondary Forming - Nickel.

Flow Behavior of Superalloy 945 During High Temperature Deformation (S. Coryell, K. Findley, and M. Mataya).

Innovations in Primary and Secondary Forming - Titanium.

The Application of Fine Grain Titanium 6Al-4V for Superplastic Forming and Superplastic Forming and Diffusion Bonding of Aerospace Products (L. Hefti).

Manufacturing of β-Titanium Ti-10V-2Fe-3Al Spin-Extruded Hollow Shafts for High Strength Power Train Applications in Aerospace and Automotive Industries (C. Machai, and D. Biermann).

Innovations in Primary and Secondary Forming - Aluminum, Magnesium, and Titanium Aluminides / Innovations in Machining and Joining.

Study on the Asymmetric Cross Rolling of AZ31 Magnesium Alloy (B. Chen, C. Lu, D. Lin, and X. Zeng).

Material Flow Forming the Shoulder Flow Zone Using Scroll Shoulder Tool during Friction Stir Welding of Thick Section Aluminum Alloys (D. Yan, Z. Chen, and G. Littlefair).

International Symposium on High-Temperature Metallurgical Processing.

Thermodynamic Analysis and Experimental Test of primary Al-Si Alloy prepared by Carbothermal Reduction of Bauxite Tailings (Y. Dong).

Innovations in Ironmaking

Development of a Novel Gas-Suspension Ironmaking Technology with Greatly Reduced Energy Consumption and CO2 Emission (H. Sohn, and M. Choi).

Thermal Equilibrium Calculation and Application

of Microwave Heated Ignition (MHI) for Iron Ore Sintering (Y. Zhang, X. Mao, Z. Huang, G. Li, and T. Jiang).

Coal-based Direct Reduction of Iron Concentrate Pellets by Microwave Heating (W. Xia, and H. Zhucheng).

Effects of Composite Binder (CB) on Oxidation Behavior of Iron Ore Pellets (T. Jiang, Y. Hu, Y. Huang, G. Li, G. Han, and Y. Zhang).

Study on Direct Reduction-separation of Limonite by Microwave Heating (Z. Huang, and L. Lv).

Preparation of Metallized Pellets and Recovery of Tin and Zinc from Tin, Zinc-bearing Complex Iron Concentrates (D. Huang, Y. Zhang, G. Han, G. Li, and T. Jiang).

Researches on Magnetic Roasting-separation of Coal-containing Limonite Pellets by Microwave Heating (H. Bing, and H. Zhucheng).

Mathematical Modeling for Side-Blow Combustion Region in Iron Bath Reactor with H2-C Mixture Reduction (Z. Bo, and H. Xin).

Al-Fe Separation from High Aluminium Content Limonite Ores by Salt-Added Reduction Roasting Process (T. Jiang, M. Liu, N. Sun, and G. Li).

A Study on Beneficiation of Low Grade Highphosphorus Iron Ore (Z. Deqing, C. Tiejun, P. Jian, and W. Xuemei).

Ceramics and Intermetallics.

Process Development: Challenges and Driving Forces for Change (K. Forwald).

Glass Coating for Iron- Based Powder Metallurgy Components (A. Garkida, J. Hwang, X. Huang, A. Hein, and Z. Peng).

Bonite - A New Raw Material Alternative For Silica-Free High Strength Aluminum Metal Refractories (D. Zacherl, A. Buhr, D. Schmidtmeier, and R. McConnell).

A Technique to Measure Heat of Reaction in TiB2 Reinforced Intermetallic Matrix Composites (A. Baker, S. Kampe, and T. Zahrah).

Microwave Synthesis of Nano-Boron Carbide Powder (L. Hu, H. Lu, and Y. Liu).

Secondary Processing.

Recovery of Iron and Zinc from Electric Arc Furnace Dust using a Microwave Processing Method (J. Hwang, X. Sun, and X. Huang).

Reduction Behavior of Chromium Oxide in Molten Stainless Steel Slag with Graphite (Q. Li).

A Novel Process for Preparing Ferronickel Powder from Laterite Ores (G. Li, M. Rao, T. Jiang, Y. Zhang, and Q. Li).

Decomposition/Volatilization of Enargite in Nitrogen-Oxygen Atmosphere (R. Padilla, A. Aracena, and M. Ruiz).

Influence of Additives on Dephosphorization of OolItic Hematite by Direct Reduction Process (G. Li, C. Xie, Y. Zhang, Q. Li, and T. Jiang).

Effect of Damp Grinding on Preparation of Oxidized Pellet from Pyrite Cinders Concentrates (J. Li, G. Bai, G. Li, and X. Zhou).

Smelting and Reduction Processes.

Industrial Operation of JAE Nickel Smelting Technology at Jinchuan Nickel Smelter (M. Zhou, A. Wan, G. Li, R. Baldock, and H. Li).

Carbothermic Reduction of Niobium Concentrate (J. Neto, F. Neto, and C. Takano).

Volatilization of Antimonite in Nitrogen-Oxygen Atmospheres (R. Padilla, G. Ramirez, A. Aracena, and M. Ruiz).

The Optimization of the Coke and Agglomerte Quantity in Lead Production in "Water-Jacket" Furnace(A. Haxhiaj, and E. Haxhiaj).

Influences of Mgo on Roasting Properties of Iron Ore Oxidized Pellets (X. Fan, M. Gan, T. Jiang, X. Chen, and L. Yuan).

Research on the Intensifying Reduction Technology Based on Mechanically Activated Ilmenite Ore (Y. Guo, H. Liu, T. Jiang, and G. Qiu).

Study on Reduction Roasting and Separation of Nickeliferous Laterite by Microwave Heating (Y. Lingyun, and H. Zhucheng).

Study on Preparation of Titanium-Rich Material Form Ilmenite by Reduction-Magnetic Separation Process (Y. Guo, D. Huang, G. Qiu, and T. Jiang).

Processing Materials for Properties.

Effect of Deformation Ratio and Cooling Rate on Mechanical Properties and Microstructure of 0.08wt% C HSLA Steel Microalloyed with Nb and Mo (A. Farahat, A. Almosilhy, T. El-Bitar, and A. Hegazy).

Advanced Materials Processing

Materials Science for the Next Generation (D. Olson, and B. Mishra).

Increase Production and Quality Improvement of Electrolytic Copper at Tank House in Naoshima Smelter & Refinery (H. Zen, T. Ishida, and M. Takagi).

Damage of Surface by Impact of Nitrogen Jet under Pressure and Low Temperature (H. Laribou, C. Fressengeas, D. Entemeyer, V. Jeanclaude, and A. Tazbit).

Non-Linear Analytical Practices for Interfacial Phenomena and Nano-Size Microstructural Properties and Behavior (J. Roubidoux, J. Jackson, B. Mishra, and D. Olson).

Modernization Project of Onahama Smelter with New "O-SR Process" (O. Lida, T. Matsutani, and K. Kiyotani).

Evaluation of Stress Corrosion Cracking Susceptibility of Drill Pipe Steels in CO2 Saturated Aqueous Solutions (A. Gavanluei, B. Shaily, B. Mishra, and D. Olson).

Promotion of Recyclable Material Treatment at Mitsubishi Process in Naoshima Smelter & Refinery (T. Sakai, N. Usami, and M. Kawasaki).

A Novel Process on Production of Thin Wall Austempered Ductile Iron Heat-treated in the Mold (A. Kaini-Rashid, A. Babakhani, and S. Ziaei).

Agglomerates and Composite Materials Processing.

Surface Peening Morphology Evaluation in Anodized Aluminum Alloy Rotors (M. Khan).

Effects of Particle Size, Deformation and Heat Treatment Processing on Strength and Ductility of Aluminum-Iron composite (S. Adeosun, S. Balogun, F. Ochulor, W. Ayoola, and O. Sekunowo).

Features of a Structure and Properties of the Agglomerates Obtained from Rich Ores (S. Borys, I. Kruglyak, and A. Zherebtsov).

Advanced Steel Processing.

Casting Practice for High-Carbon Nitrogen-Alloyed Chromium-Manganese Austenitic Stainless Steels (M. Heilig, B. Mishra, M. Marya, and D. Olson).

Processing and Electrochemical Corrosion Resistance of a Nanocrystalline Fe-20Cr Alloy (R. Gupta, R. Singh, and C. Koch).

Towards Modelling of Phase Transformation and Mechanical Properties in Hot Rolled Dual Phase Steel (P. Suwanpinij, K. Mukherjee, M. Graf, U. Prahl, and W. Bleck).

Light Weight Materials Processing.

Effect of Casting Mould on Mechanical Properties of 6063 Aluminium Alloy (W. Ayoola, S. Adeosun, O. Sanni, and F. Ochulor).

Ignition Characteristics of Aluminum-Nickel Heterostructures Produced by Ultrasonic Powder Consolidation (D. Erdeniz, D. Colanto, G. Gulsoy, and T. Ando).

Improved Formability of Normalized Cold Rolled Aluminum 1200 and 1230 Alloys (S. Adeosun, and S. Balogun).

Studies on the Microstructure, Mechanical and High Temperature Wear Behviour of A356 Alloy with Minor Additions of Copper and Magnesium (K. Shivaputrappa).

Low Stress Viscous Creep in a Ti3Al2.5V Tubing Under Internal Pressurization (S. Gollapudi, I. Charit, and K. Murty).

Functional Materials Processing.

Production and Characterization of ASTM F75 Balls Produced by the Uniform-Droplet Spray Process (S. Roy, and T. Ando).

Preparation and Characterization of Microfibrous Entrapped Solid Adsorbents for Desulfurization of Liquid Fuels (D. Cocke, M. Islam, J. Gomes, E. Peterson, M. Reed, D. Tran, and H. McWhinney).

Surface Structural Properties of the V, Nb and Ta (001) Surfaces (A. Ramanathan).

TiO2 Aggregates for Dye-Sensitized Solar Cells Application (Q. Zhang, X. Zhou, C. Dandeneau, K. Park, S. Yodyingyong, and G. Cao).

Processing-Microstructure-Properties.

Microstructure and Properties of New Wear Resistant Steel with High Strength and High Toughness (L. Hongbin).

Preparation and Mechanical Properties of Nanostructured Cryomilled NiCrAlY Alloy Fabricated by Spark Plasma Sintering (J. Song, K. Ma, L. Zhang, and J. Schoenung).

Accounting for High Temperature Measurements with Changing Effective Emissivity in PTAW Processing (T. Wolfe, and H. Henein).

Polymers, Ceramics and Glasses.

Microscopic Study of Slags from a Secondary Lead Blast Furnace (F. Tanaka, Y. Kimura, and M. Watanabe).

Particle Size Distribution of Natural Montmorillonite Clay Using Dispersion Analysis (M. Reed, G. Beall, D. Cocke, and J. Gomes).

Study of Properties of Spinels, Obtained by Hydrothermal Synthesis (O. Restrepo, L. Jaramillo, and E. Murillo).

Research on the Performance of Environment-Friendly MgO-CaO-ZrO2 Refractories (C. Lu, M. Chen, J. Yu, and Z. Sun).

Synthesis of Spinels by Thermal Spray Flame (O. Restrepo, and E. Murillo).

Refractory Metals 2010.

Refractory Metals 2010: Processing and Properties 2.

Strength and Oxidation Resistance of Mo-Si-B Alloys Produced by Reaction Synthesis (M. Middlemas, J. Cochran, P. Jain, and K. Kumar).

Author Index.

Subject Index.